Troubleshooting - Selve i-Timer Plus Notice D'utilisation

Troubleshooting

Troubleshooting
Problem
Drive is not functioning
Venetian blind or
roller shutter moves in the
wrong direction
Astro programme
does not function according
to the switching times
The i-Timer Plus does not
carry out the switching
commands
The i-Timer Plus does not
carry out the switching
commands precisely
The sun and twilight
parameters cannot
be changed,
and/or are not displayed
Venetian blind or
roller shutter does not
move to the end limit
Cause
Faulty connection
Faulty connection
Date is incorrect
Wrong city or wrong
latitude/longitude set
Holiday function
is switched on
Astro shift is set
The sliding switch is
on manual
Holiday function
is switched on
No light sensor is connected Check the light sensor,
or the light sensor,
and/or the connecting cable
is faulty
The set running time
is not long enough
No end limit position is set
79
Solution
Check the connection
Exchange ▲ and ▼ wires
in the power supply unit
Set correct date
Set correct city
or exact degrees
latitude/longitude
Switch holiday function off
Adjust astro shift
Move the sliding switch
to automatic
Switch holiday function off
connecting cable and
connector plug
Adjust the running time
in the function menu
Set the end limit position
using the setting menu
PROG 1/2
GB