Ryobi RCT4 Traduction De La Notice Originale page 4

TRANSPORTING
BATTERIES
Transport the battery in accordance
with local and national provisions and
regulations.
Follow all special
on packaging and
transporting batteries by a third party.
Ensure that no batteries can come in
contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking.
Check with the forwarding company for
further advice.
KNOW YOUR PRODUCT
See page 106.
1. LED indicator
2. Battery cap
3. Lock-off button
4. Switch trigger
5. Blade screw
6. Blade
7. Battery pack
8. USB charging cable
9. Operator's manual
10. USB power adaptor
LED INDICATOR
Battery status LED indicator
Charged Solid green
Low battery Solid red
(5 - 25%)
Low battery Flashing red (3
(0 - 5%)
Overload Flashing red (6
protection
4
Original Instructions
LITHIUM
requirements
labelling when
High Flashing red (9
temperature
protection
MAINTENANCE
The product should
connected to a
when assembling
maintenance, or when the product is
not in use. Disconnecting the product
from the power supply will prevent
accidental starting that could cause
When servicing, use only original
manufacturer's replacement parts,
accessories and attachments. Use of
any other parts may create a hazard
or cause product damage.
Avoid using solvents when cleaning
plastic parts. Most plastics are
susceptible to various types of
commercial solvents and may be
damaged by their use. Use clean
cloths to remove dirt, carbon dust,
etc.
Do not at any time let brake fluids,
gasoline, petroleum-based products,
penetrating oils, etc., come in contact
with plastic parts. Chemicals can
damage, weaken or destroy plastic
which may result in serious personal
For greater safety and reliability, all
repairs should be performed by an
authorised service centre.
SYMBOLS
Danger! Sharp blade.
never be
power supply
parts, making