Kohler K-15177 Guide D'installation page 3

Apply
plumbers
putty.
Long Tube
Spout
Hose
1. Remote Valve Installation
Attach the spout hose to the long tube on the remote valve.
Slide the gasket up over the remote valve supply hose inlets.
Place the gasket on the bottom of the escutcheon.
NOTE: Plumbers putty or other sealant may be used instead of the
gasket provided. Apply the plumbers putty or other sealant
according to the manufacturer's instructions.
Feed the remote valve supply hose inlets, handspray hose outlet
and spout hose through the sink hole.
Position the remote valve so that the lever handle is centered
when facing the user.
Slide the bracket and washer over the stud.
Tighten the nut securely to the stud.
Remove any excess putty or sealant.
Kohler Co.
All manuals and user guides at all-guides.com
Remote Valve
Escutcheon
Supply
Tubes
Gasket
Sink
Bracket
Washer
Nut
3 114681-2-BC