Publicité
Les langues disponibles
Les langues disponibles
DM 2610011834 07-10:DM 2610011834 07-10.qxp 7/20/10 1:20 PM Page 20
Accessory
MM11
Base plate for
sanding
MM411
3/8" HCS wood
flush cut blade
MM440
3/4" HCS wood
flush cut blade
MM422
3/4" BIM wood
metal flush cut
blade
MM450
3" HCS Flat
Saw Blade
MM500 MM501
Segmented
1/8", 1/16" grout
removal
MM600
Rigid scraper
blade
MM610
Flexible scraper
blade
MM900
60 grit diamond
paper
MM70P
Sand paper
MM70W
Sand paper
All manuals and user guides at all-guides.com
Multi-Max Accessories
Material
Application
Depends on sanding
Sanding surfaces close to edges, in
sheet
corners or hard to reach areas.
Depending on the sanding sheet for, e.g.,
sanding wood, paint, varnish, thinset
and cement.
Wood, plastic,
Smaller cuts and flush cuts. Example:
drywall and other
Cut-outs in furniture for cable
soft materials
connections.
Wood, plastic
Cutting and deep flush cuts; also for
drywall and other
sawing close to edges, in corners and
soft materials
hard to reach areas.
Example: Flush cutting door jamb or
window sill, for flooring or tile installation.
Non-ferrous metals,
Smaller cuts and plunge cuts.
wood, plastic and
Example: Sawing off water pipes
other soft metals
(copper) or cable ducts flush against
walls, floors or ceilings.
Wood (limited use on
Cutting in existing trim or flooring. Cutting
hard wood) plastic,
close to edges in corners or hard to reach
drywall and other
areas. Examples: Installing floor vent or
soft materials.
repairing damaged wood flooring.
Removing grout from between wall or
Grout joints
floor tiles.
Example: Removing grout joints between
wall tiles for repair work.
Remove vinyl flooring and bonded
Vinyl, varnish and
carpeting. Example: On stairs/steps or
carpeting
other small/medium sized surfaces.
Scraping off old coats of varnish/paint or
other adhesive.
Caulk, adhesives,
Removing caulk, coats of peeling paint
paint and other soft
or soft adhesive.
materials
Thinset, cement
Removing thinset or cement; Example:
motar and paint.
Grinding away thinset after tile removal.
Removing paint or oil stains from cement.
Varnish and paint
For sanding primer and removing brush
removal
strokes, drops of paint and paint run.
Bare wood,
For detail sanding.
hardwood, softwood,
chipboard, metal
HCS = High Carbon Steel BiM =BiMetal
-20-
Publicité
