Publicité
Les langues disponibles
Les langues disponibles
ATTENTION!
The recharging process generates heat in the battery. It
is not advisable to recharge the battery in temperatures
below freezing. The battery will gradually lose its charge
over a period of time, even if the tool is not used.
Checking the power status on battery pack
You can check the battery pack's power status by briefly
pushing on the button located on the back of the battery
pack. The diodes will light up to indicate the remaining
power status:
- 3 diodes light up - full charge
- 2 diodes light up - medium charge
- 1 diode lights up - low charge
Shortly after, the diodes will turn off.
Note: The battery that is supplied with the screwdriver/drill
has been charged for test purposes only and must be fully
recharged before first time use.
TRIXIG screwdriver/drill and TRIXIG battery pack have been
designed to be used together.
NEVER use this battery pack to power cordless tools from
other manufacturers.
The lithium-ion battery is protected against deep
discharging by the "Electronic Cell Protection (ECP)". When
the battery is empty, the machine is switched off by means
of a protective circuit: The inserted tool no longer rotates.
18
Publicité
