JVC TU-FD53D Manuel D'instructions page 86

Connections
NOTE : Before connecting the set top box to other equipment e.g. TV , always refer to the
relevant user manual for instructions. Also make sure all equipment is disconnected from the
mains supply before connection.
Connecting a HD TV
TV Aerial
1. Connect the coaxial cable (not supplied) from your aerial to the RF IN socket on the rear of
the set-top box.
2. Connect an HDMI cable (not supplied) to the HDMI output on the rear of the set-top box.
Connect the other end to a HDMI input on the TV.
 Refer to the TV manual for details on selecting the HDMI input.
3. Plug the power adapter into the mains socket and insert the jack into the DC IN socket on
the rear of the set- top box.
Connecting a non-HD TV with a SCART cable
If your TV does not have a HDMI input you can connect using a SCART cable.
EN-6