JVC TU-FD53D Manuel D'instructions page 87

1. Connect the coaxial cable from your aerial to the RF IN socket on the rear of the set-top box.
2. Connect a SCART cable (not supplied) to the SCART OUT socket on the rear of the set top
box. Connect the other end to a SCART input on the TV.
 Refer to the TV manual for details on selecting the SCART input.
3. Plug the power adapter into the mains socket and insert the jack into the DC IN socket on
the rear of the set- top box.
NOTE : If you have a TV with an internal tuner, you can optionally connect a cable from the RF
OUT socket on the rear of the set-top box to the appropriate input on your TV.
Using Your Set-top Box
First Time Installation
1. After making the connections, switch on the TV and press the POWER button to turn on your
set-top box.
• If you are using the set-top box for the first time, or have reset it to the factory
settings, the Welcome setup wizard will be displayed on the TV.
2. Use the directional buttons on the remote control to select your Region, Language, Display
Mode, and Aspect Mode.
3. Press OK at the bottom of the setup wizard to confirm your settings and start the channel
search.
4. Once the search is complete, you can watch TV.
EN-7