JVC TU-FD53D Manuel D'instructions page 93

Other
Antenna Power
This option allows you to select Antenna Power On or Off.
If you select antenna power On, it will supply 5 volts of power to the antenna.
Channel Play Type
You can use the UP/DOWN button to select play desired channel type :
ALL – The channel list will display all scanned programs.
Free – the channel list will display the scanned Free-to-Air programs.
Scrambled – The channel list will display the scanned scrambled programs.
Beeper
This option allows you to set Beeper On or Off.
If you select beeper On, beeps will be heard when searching for channels and there is no
signal found.
Auto Standby
This option allows you to enable / disable Auto Standby :
If you select Auto Standby On, your set-top box will automatically go to standby mode after
3 hours if no activities are detected.
Menu  Tools
The Tools sub-menu allows you to perform or view the following.
Information
This page shows the model, hardware and software information of your set-top box.
Factory Setting
This option allows you to reset your set-top box to the default factory settings. Resetting will
delete all the installed channels, Favorite lists and user settings.
S/W Upgrade by OTA
This option allow you to scan the broadcast and upgrades the software if a newer version is
available.
EN-13