Publicité
Les langues disponibles
Les langues disponibles
Instructions for use
WARNING!
Switch off the chainsaw under the following
conditions:
− If the equipment is left unattended.
− Before checking, cleaning or other
measures on the equipment.
− If the equipment starts to vibrate heav-
ily.
Before initial operation
Unpack the device and check that there are
no missing or damaged parts.
NOTE
Notify the FUXTEC Customer-Service of de-
fective or missing parts without delay!
Adjustments before use
WARNING!
Before any work on the components of the
petrol chainsaw, the equipment must be
made safe and secured against unauthorised
activation.
CAUTION!
Do not replenish the fuel mixture and chain
saw oil in the required quality until all of the
necessary assembly, adjustment and inspec-
tion tasks have been carried out on the
chainsaw.
Items supplied
CAUTION!
The teeth of the saw chain are extremely sharp!
Always wear gloves when fitting the saw chain.
Items included with the equipment:
1
Drive unit
2
Saw chain
3
Guide rail
4
Chain cover
5
Spark plug wrench
6
Round file
7
Chain tensioner
8
Hole
34
Original manual for petrol chainsaw FX-KSP series
Guide rail and saw chain assembly
DANGER!
Always switch off the engine and wait until it
has come completely to rest before tension-
ing or retensioning the saw chain!
a) Pull the chain brake lever towards the front
handle to make sure that the chain brake is
not activated.
b) Loosen two nuts and remove the chain
cover.
c) Fit the guide bar to the unit. Make sure
that the chain tensioner is inserted into the
lower hole of the guide rail.
Publicité
