Philips RC670 Mode D'emploi page 14

CASSETTE PLAYER *
PLAYBACK
Slide the cassette, with the open side to the
right into the cassette opening.
Playback starts.
If a cassette is already inserted :
Select cassette as SOURCE :
v
Playback starts.
CHANGE SIDE
+ Change the side :
* At the end of the cassette, playback
automatically continues with the other side.
4
S
{\ '\
REWIND / FAST FORWARD
* Wind the tape backwards or forwards. You hear
the radio during this operation. If you continue
fast winding until the end of the tape, playback
restarts automatically.
¢ To stop the the rewind / fast forward before
reaching the end of the tape, press the key which
has not been pressed.
Ase)
* Depending on version
14
CASSETTE EJECT
-@* Useful tips
Display shows 'ERROR'.
* Check tape for faults
Cassette playback lacks high-notes or loss of
one channel.
* Clean cassette player tape head.
Cassette mechanism changes direction of play
before end of tape.
* Rewind cassette to the end of the tape.
CARE OF CASSETTES
— Only use good quality cassettes of 60 or 90
minutes.
— Put cassettes back in their boxes immediately
after use to protect them from dust and dirt and
to prevent the tape from unwinding.
— Never expose cassettes to heat or direct
sunlight.
— Clean the tape head (once or twice a month)
using a wet-tape cleaning cassette.