Vitrifrigo OCX2 Manuel D'instructions page 28

take place and so that no humidity is created inside the tray. For the REFILL versions,
empty and clean the tank.
10. CLEANING THE ICE MAKER
Before starting to clean the ice maker, make sure it is not connected to the mains electricity.
If connected, unplug the appliance from the electrical supply.
EXTERNAL
Wash the outside of the ice maker with lukewarm water, rinse with cold water and dry
with a soft cloth. Avoid the use of abrasive products.
INTERNAL
Remove the ice collection tray and proceed with cleaning using warm water with the
addition of baking soda or vinegar. Rinse and dry carefully with a soft cloth. Strictly avoid
the use of abrasive products, detergents or soaps. It is advisable to clean the tank at
least once every three months.
CONDENSER
It is advisable to clean the condenser at least once a year using a vacuum cleaner or a
dry brush.
ATTENTION:
very nature, has sharp surfaces; to avoid accidental injury, it is advisable to use legally
compliant protective gloves (PPE).
11. WHAT TO DO IF THE ICE MAKER DOES NOT WORK
The machine has an "ANOMALY" indicator light (red light C flashing) which comes on if more
than 50 minutes elapse between one water fill and the next. In this case, perform the checks
listed below.
If you do not manage to achieve regular operation after these checks, contact the
customer assistance service.
ENG
28
clean the condenser operating with the utmost caution which, by its