Christopeit Sport Omega Notice De Montage Et D'utilisation page 22

Step 5:
Attach the pulse grip (12) at handlebar support (10).
1. Guide the pulse grip (12) through the appropriate holder of support (10)
and adjust the holder so that the holes and threats align. Put on each
screw M8x16 (17) one washer 8/16 (3) and tighten the pulse grip (12) at
the support (10) firmly.
2. Put the pulse cable (18) through the hole at support (10) into top position.
Step 6:
Installation of the computer (1) at handlebar support (10).
1. Put the plug of connection cable (9) into the cable socket from monitor
(1) and insert the plug of pulse connection cable (18) into the pulse
socket of the monitor (1). Attach the monitor (1) to top monitor bracket
of front post (10) and tighten with screws (11). (Attention: Ensure that
the cable loom are not crunched or pinched during installation.)
Step 7:
Attach the power with adaptor (96).
1. Please insert the cable plug of adaptor (96) into the DC cable plug (94)
at end of chain guard (65L).
2. Please insert the adaptor (96) into a well-installed socket with wall
power (230V~50Hz).
Step 8:
Checks
1. Check the correct installation and function of all screwed and plug
connections.
Installation is thereby complete.
2. When everything is in order, familiarise yourself with the machine at a
low resistance setting and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as these may
be required for repairs or spare parts orders becoming necessary later.
22