Publicité
Les langues disponibles
Les langues disponibles
INSTALLING SIDE BRUSHES
1.
Turn the unit over.
2.
With unit upside down, align side brush over brush post.
Please keep the color of side brushes' same as each brush posts.
3.
Press brushes downside until it snaps in place.
4.
Ensure side brushes can rotate freely.
5.
Reference to picture above.
CHARGING ROBOT VACUUM CLEANER
1.
Place the charging base against a wall and remove all of
obstructions around the charging base, as shown in the picture
above. Please do not place the charging base on a carpet and
keep the area dry. Also help to remove the mopping holder
when it is charging.
2.
Turn the power switch on. Refer to chapter BUTTONS
FUNCTION.
3.
Place vacuum on the charging base, ensuring the charging
contacts are touching. A white light will start flashing,
indicating the robot is charging. Charge for 12 hours before
first use.
EN-13
Start/Pause
NOTE:
1.
Please charge before first use.
2.
When the battery is low power, please charge it as soon as possible.
3.
If you do not use the appliance for an extended period of time,
fully charge the battery and put it in a ventilated and dry place.
4.
Charge the robot every 3 months if it is not used for a long time
to protect battery.
5.
This machine has automatic recharge function. In some special
cases (such as battery is dead, the machine is stuck, etc.),
the main unit may not be able to automatically recharge.
BEFORE CLEANING TIPS
Please clean up the wires and sundries scattered on the ground
and remove valuable, fragile items that are easy to fall before
cleaning. If there is a suspended environment in the clean area,
please use objects to fix and block to avoid any potential harm. It
is recommended to follow the sweeping robot to find some
possible problems during the first cleaning process. The robot can
clean much more smoothly after that. If certain special areas do
not need to be cleaned or the robot may be trapped, you can add
a restricted area or virtual wall on the map in the APP to prevent
the robot from entering the above special area.
Do not use your robot on wet surfaces or surfaces with standing
water. Before using the product on a rug with tasseled edges,
please fold the rug edges under.
EN-14
Publicité
