UPPAbaby G-LITE Mode D'emploi page 8

STROLLER OpERaTION
TO aTTaCH RESTRaINT BUCKLE
STEp 1: Slide plastic clip
into buckle until you
hear a "click".
STEp 1: Undo buckle and
slide shoulder harness
fastener off.
aTTaCHING/aDJUSTING CUp HOLDER
NOTE: Cup holder can be placed on either side of stroller.
WaRNING: Maximum cup holder weight is 1.5 lbs (.7 kg). Excessive weight may cause a hazardous, unstable
condition to exist. Do not place hot liquids in holder.
All manuals and user guides at all-guides.com
OpERaTING RESTRaINT BUCKLE
STEp 2: Secure buckle
cover Velcro.
2
1
aDJUSTING THE SEaT HaRNESS
1
STEp 2: Push harness
straps and buckles
through holes in pad.
C L I C K
7
TO RELEaSE RESTRaINT BUCKLE
STEp 1: Lift buckle cover.
2
1
2
STEp 3: Feed harness
straps and buckles
through desired slots.
aTTaCHING THE CUp HOLDER (LEFT)
Snap cup holder into place using attachment pins
located below handle.
aDJUSTING THE CUp HOLDER (RIGHT)
STEp 1: Loosen screw and turn bracket 180 degrees.
STEp 2: Tighten screw to fasten bracket to cup holder.
STEp 2: Press middle
button to release.
STEp 4: Reattach shoulder
harness fasteners.
ENGLISH