Klarstein CLARA 10040140 Mode D'emploi page 37

Replacing the lamp
1. Switch off the appliance and pull out the power plug.
2. Open the glass cover and remove the grease filter. Put one hand into the
cavity and carefully push out the LED light. Pull the light out from the outside
with the other hand. Dismantle the lamp cable connector and remove the
lamp.
3. When installing the new lamp, proceed in reverse order.
Max.
Voltage
power
2 x 1.5 W DC 12 V
LED
Dimensions:
modules
Round
lamp
ILCOS D
code
DSR-1.5/
65-S-64
EN
37