Transistor AutoMini Digital Mode D'emploi page 19

Connection option D: Microphone (Extra accessory)
If the TV does not have an Optical, Line Out socket or SCART, use an FXT micro-
phone (ordered separately) to pick up the TV sound.
1. Connect the microphone to the amplifier's LINE/DIGITAL socket.
The DELAY knob should be in OFF mode.
2. Attach the microphone to the TV speaker with Velcro fastener.
Please note! The sound quality varies between different parts of the loudspea-
ker. Start by placing the microphone in the centre of the loudspeaker. If you are
not satisfied with the sound, test to find out which microphone position gives
the best sound.
3. Set the switch on the front of the amplifier to the LINE/DIGI position.
The relevant lamp will come on.
ENGLISH
19