Transistor AutoMini Digital Mode D'emploi page 17

3.5 mm Audio output
1. Connect the 3.5 mm audio cord between the TV and the
amplifier's
LINE/DIGITAL socket. The DELAY knob should be in OFF mode
2. Set the switch on the front of the amplifier to the LINE/DIGI position.
The relevant lamp will come on.
-->
Proceed to step 3: "Connecting the listening loop", page 17.
If your TV does not have a Line Out or a 3.5 mm audio output, move on to connection
option C.
Please note! Some TVs have a sound input on the front or on the side which looks
like a Line Out output but which is NOT able to transmit soundt o an amplifier.
This is usually marked "Audio" and is located next to sockets marked "Video" and
"S-Video" (se TV user manual).
ENGLISH
17