Danfoss TP7000-RF Instructions D'installation page 11

To convert to Thermostat mode
The TP7000 can be converted to control at a constant user
selected temperature, instead of following the set programme.
Press & hold L and M together until
display changes to colon blinking &
default temperature (8°C).
Press L or M to alter temperature
as required.
!
NOTE: unit will remain in thermostat mode until the
L and M buttons are pressed together again.
To programme Holiday Mode
(whilst in Thermostat Mode)
The TP7000 can control at a constant low temperature while
you are away on holiday, returning to your programmed settings
after a specifi ed number of days (maximum 99 days).
(If not already in Thermostat Mode, press
& hold L and M together until display
changes to colon blinking & 8°C)
Press DAY (display will show a suitcase
and :00)
Press + and - to enter number of days
of holiday (max.99)
Use L and M buttons to alter the
constant temperature, if required.
When selected number of days have
elapsed, the unit will return to normal,
controlling according to your set
programmes.
NOTE: Press L and M buttons together
to exit holiday mode if necessary
11