Publicité
Les langues disponibles
Les langues disponibles
INSTALLATIoN
Installation
f Push all terminals into the flush box.
f
f Guide the connecting cable through the aperture in the wall
f
mounting enclosure.
f Pull the connecting cable out of the flush box as far as the
f
edge of the wall mounting enclosure.
f Place the connecting cable in the groove of the wall mount-
f
ing enclosure.
f Secure the wall mounting enclosure with the octagonal
f
mounting plate and the 4 self-tapping countersunk screws
provided. Secure the countersunk screws evenly and not too
tightly.
WARNING Electrocution
Ensure that the screws used do not damage the wiring.
www.stiebel-eltron.com
All manuals and user guides at all-guides.com
f To provide contact protection, fit the cover plate with the clip
f
rivets (cover plate and clip rivets are included in the standard
delivery).
T-Soll
f Plug the flush mounted power supply unit into the "T-soll"
f
socket in the programming unit.
f Push the programming unit into the wall mounting enclosure
f
until it fits flush (all 4 locking tabs have clicked into place).
FFB Set |
27
Publicité
