Stiebel Eltron FFB W Set Installation page 21

INSTALLATIoN
Appliance description
3.2 FFB W Plus Set EU and FFB T Plus Set EU
These sets, which include a programming unit, enable the DHE
to be operated using the wireless remote control. This allows for
convenient operation of the DHE Connect or DHE Touch, irrespec-
tive of the installation site.
Dynamic anti-scalding protection
With dynamic anti-scalding protection, once the user selects a
temperature at the appliance programming unit / wireless remote
control, they then automatically have priority for setting the maxi-
mum temperatures. This priority is available for 2 minutes or until
2 minutes after the end of the current draw-off. After this, the
priority is automatically disabled.
Whilst the priority is enabled, the temperature can be reduced or
increased up to 43 °C by other programming units.
3.3 Operation
For information on operating the appliance programming units,
the FFB W Plus Set EU and the FFB T Plus Set EU, see chapter
"Operation" in the related document.
www.stiebel-eltron.com
All manuals and user guides at all-guides.com
3.4 Standard delivery
3.4.1 FFB W Set
1 2 3 4 5
1 Dummy cover
2 Clip rivet (3 pce)
3 Cover plate
4 Self-tapping countersunk screws (4 pce)
5 Mounting plate
6 Wall mounting enclosure
7 Appliance screws (2x2 pce)
8 Mounting plate
9 Flush mounted power supply unit
10 Terminal (3 pce)
11 Plastic levering tool for removing the programming unit
6 7 8 9 10
11
FFB Set | 21