Publicité
Les langues disponibles
Les langues disponibles
INSTALLATIoN
Installation
f Remove any screws from the flush box.
f
f Pull the connecting cable through the aperture in the square
f
mounting plate. Secure the mounting plate (with the word
"front" at the front) by tightening the appliance screws. Use
the suitable appliance screws provided.
f Pull the connecting cable through the aperture in the cover
f
frame. Position the cover frame on the flush boxes.
www.stiebel-eltron.com
All manuals and user guides at all-guides.com
f Guide the connecting cable through the aperture in the wall
f
mounting enclosure.
f Place the connecting cable in the groove of the wall mount-
f
ing enclosure.
f Position the wall mounting enclosure with the octagonal
f
mounting plate on the cover frame.
f Pull the connecting cable out of the flush box as far as the
f
edge of the wall mounting enclosure.
f Secure the wall mounting enclosure with the mounting plate
f
and the 4 self-tapping countersunk screws provided. Secure
the countersunk screws evenly and not too tightly.
WARNING Electrocution
Ensure that the screws used do not damage the wiring.
FFB Set |
25
Publicité
