Stiebel Eltron FFB W Set Installation page 26

INSTALLATIoN
Installation
f To provide contact protection, fit the cover plate with the clip f
rivets (cover plate and clip rivets are included in the standard
delivery).
T-Soll
f Plug the flush mounted power supply unit into the "T-soll" f
socket in the programming unit.
f Push the programming unit into the wall mounting enclosure f
until all 4 locking tabs have clicked fully into place.
26 | FFB Set
All manuals and user guides at all-guides.com
f With the FFB W Set, the appliance programming unit f
6.3
You can also mount the set on a single flush box without a cover
frame.
f Guide the cables over the edge of the flush box. f
f Place the flush mounted power supply unit in the flush box. f
f Connect the flush mounted power supply unit to the cable f
is already paired. With the FFB W Plus Set EU, pair the
programming unit with the instantaneous water heater (see
related document DHE Connect | DHE Touch operating and
installation instructions, chapter "New / Additional program-
ming unit learning").
FFB W Set and FFB W Plus Set EU – installation
without cover frame
(terminals included with standard delivery).
www.stiebel-eltron.com