Electrolux EHH6540FHK Notice D'utilisation page 11

signal communicator. Speed of the fan is
defined automatically on basis of mode
setting and temperature of the hottest
cookware on the hob. You can also
operate the fan from the hob manually.
For most of the hoods the
remote system is originally
deactivated. Activate it before
you use the function. For
more information refer to
hood user manual.
Operating the function automatically
To operate the function automatically set
the automatic mode to H1 – H6. The hob
is originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes temperature of the cookware
automatically and adjusts the speed of the
fan.
Automatic modes
Auto-
matic
light
Mode Off
H0
Mode On
H1
Mode On
3)
H2
Mode On
H3
Mode On
H4
Mode On
H5
Mode On
H6
1) The hob detects the boiling process and
activates fan speed in accordance with auto-
matic mode.
2) The hob detects the frying process and
activates fan speed in accordance with auto-
matic mode.
3) This mode activates the fan and the light
and does not rely on the temperature.
Boil-
2)
Frying
1)
ing
Off Off
Off Off
Fan Fan
speed 1 speed 1
Off Fan
speed 1
Fan Fan
speed 1 speed 1
Fan Fan
speed 1 speed 2
Fan Fan
speed 2 speed 3
Changing the automatic mode
1. Deactivate the appliance.
2. Touch for 3 seconds. The display
comes on and goes off
3. Touch for 3 seconds.
4. Touch a few times until
on.
5. Touch of the Timer to select an
automatic mode.
To operate the hood directly
on the hood panel deactivate
the automatic mode of the
function.
When you finish cooking and
deactivate the hob, the hood
fan may still operate for a
certain period of time. After
that time the system
deactivates the fan
automatically and prevents
you from accidental activation
of the fan for the next 30
seconds.
Operating the fan speed manually
You can also operate the function
manually. To do that touch
hob is active. This deactivates automatic
operation of the function and allows you to
change the fan speed manually. When you
press you raise the fan speed by one.
When you reach an intensive level and
press again you will set fan speed to 0
which deactivates the hood fan. To start
the fan again with fan speed 1 touch
To activate automatic
operation of the function,
deactivate the hob and
activate it again.
Activating the light
You can set the hob to activate the light
automatically whenever you activate the
hob. To do so set the automatic mode to
H1 – H6.
The light on the hood
deactivates 2 minutes after
deactivating the hob.
11
ENGLISH
comes
when the
.