KTM A49012955044 Instructions De Montage page 72

6 ASSEMBLY OF SHOCK ABSORBER (HUSQVARNA MOTORCYCLE MODELS)
–
Mount rebound shim stack
–
Mount washer
–
Mount and tighten nut
Guideline
Nut, piston rod
Final steps
–
Assemble the damper (see repair manual).
–
Bleed and fill the damper (see repair manual).
–
Fill the damper with nitrogen (see repair manual).
–
Install the spring (see repair manual).
–
Adjust the spring preload of the shock absorber (see repair manual).
–
Install the shock absorber (see Owner's Manual/repair manual).
–
Install the main silencer (see Owner's/repair manual).
–
Install the frame protector (see Owner's Manual/repair manual).
–
Mount the seat (see owner's manual/repair manual).
–
Take the motorcycle off the lift stand (see Owner's Manual/repair manual).
30
cn
with the smaller washers facing upward.
cm
with the groove facing downward.
cl
.
M12x1 40 Nm (29.5 lbf ft)