Publicité
Les langues disponibles
Les langues disponibles
9.
After ironing, remove the plug from the wall socket and the appliance
will be turned off. But the soleplate is still hot, never touch it with hand,
place it on the thermal insulation stand correctly until it cools down
completely.
CLEANING AND MAINTENANCE
Before cleaning, firstly disconnect the power outlet and let the appli-
ance cools down.
1.
Wipe the residues and any other deposits on the soleplate with a
damp cloth or a non-abrasive (liquid) cleaner.
NOTE: Do not use chemical, steel, wooden or abrasive cleaners to
scrape the soleplate.
2.
Clean the upper part of iron with a soft damp cloth. Wipe the water
drop on the unit base
and the thermal insulation stand with dry cloth.
3.
Replace the de-calc box: The de-calc box should be replaced if the
appliance has been operated for 2 months. First of all, detach the
water tank and pull the de-calc box out (see Fig.5). And then replace it
with a new de-calc box. Finally, install the water tank well in position.
4.
Clean the inside of appliance by following the operation specified in
the section of "Clean button (with indicator)".
NOTES:
(1)If the appliance keeps spraying water after the "Clean" function is
activated, please press the steam trigger to make the appliance enter
into the cleaning mode.
(2)If the cleaning indicator keeps blinking and the appliance does not
perform cleaning after the "Clean" function is activated, please check
Publicité
