AYA CV 015 SD Manuel D'utilisation page 23

Steam trigger
When the appliance is heated to the selected temperature and the
temperature indicator will extinguish, press the steam trigger with a
little force, the steam will be sprayed from the soleplate. When loosen
the steam trigger, the appliance can only be used for dry ironing
without steam.
Clean button (with indicator)
The appliance must be cleaned when the clean indicator lights solidly.
1.
Before perform cleaning, prepare a container with a capacity of more
than 300ml for collecting the waste water, then put the appliance on
the container and place the container steadily.
Hold and press the "Clean button" for 2 seconds.When the buzzer
2.
sounds, the operator should keep away from the appliance to avoid
being burnt by high-temperature steam during the cleaning process.
And the appliance enters into the cleaning mode and the clean
indicator blinks. After about 3 minutes, the cleaning is completed and
the appliance returns to the working condition.