IMPORTANT SAFEGARDS
Before using the electrical appliance, basic precautions
should always be followed including the following:
1.
Read all instructions.
2.
Before using check that the voltage of wall outlet
corresponds to the one shown on the rating
plate.
3.
Do not use the appliance if the main cord, plug,
light or the appliance itself shows visible
damage, or the appliance has been dropped or
is leaking. Take it to the nearest authorized
service facility or a qualified serviceman for
examination and repair in order to avoid a
hazard.
4.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
5.
Do not allow the cord to come into contact with
the soleplate when it is hot.
6.
Burns may occur from touching hot metal parts,
hot water, or steam.
7.
Do not let cord hang over edge of table or hot
surface.
8.
To protect against a risk of electric shock, never
immerse the iron in water or other liquids. If this
has happened, do not use this appliance any