Télécharger Imprimer la page

Medel CHECK Manuel D'instructions page 30

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 128
The (I.H.B.) symbol
EN
"
but my heart beat rate
should be normal.
The light on the display
is dim or not lit
6. MAINTENANCE AND REPAIRS
For any repair operations, only refer to a technical assistance centre authorized
by the Medel International Srl and request original spare parts. Never open
the device. There are no user-serviceable parts within. The device requires no
lubrication or maintenance. Failure to comply with what expressed above may
compromise the safety of MEDEL CHECK.
7. CARE, MAINTENANCE AND STORAGE
1. For cleaning only use a soft, lightly moistened cloth.
2. Do not use petroleum spirits, thinners or similar solvents.
3. Do not wash the cuff.
4. Take care to ensure the cuff is not damaged by sharp or pointed objects such
as scissors, knives, etc.
5. Take the batteries out if the device is not used for a long period.
6. In case the device becomes malfunction due to the influence of strong electro-
magnetic fields, power off the device and repeat the procedure again.
7. Disposal of the device (and used batteries) should be carried out according to
the national regulations for the disposal of electronic products.
8. REFERENCE TO STANDARDS
Device standard: Device corresponds to the requirements of the European stand-
ard for non-invasive blood-pressure monitor.
• EN1060-3 Non-invasive sphygmomanometers - Supplementary
requirements for electro-mechanical blood pressure measuring
systems.
• EN 60601-1Safety requirements
• EN 60601-1-2 Electromagnetical compatibility
• IEC 80601- 2- 30 Particular requirements for the basic safety and essential
performance of automated non-invasive sphygmomanometers.
30
100042_MEDEL CHECK USER MANUAL_ ALL LANGUAGES.indd 30
All manuals and user guides at all-guides.com
You move your arm
" is displayed,
or arm muscles during
measurement.
The batteries are flat or
inserted incorrectly
Remain still and do
not move /contract the
muscles during measure-
ment.
Replace the flat batteries
with new ones. Insert the
batteries correctly.
16/05/2016 09:47:01

Publicité

loading