Publicité
Les langues disponibles
Les langues disponibles
General
WARNING! The user must only carry out the maintenance and service work described in this
!
manual. More extensive work must be carried out by an authorized service workshop.
The engine should be switched off, and the stop switch in STOP position.
Wear personal protective equipment. See under heading "Personal protective equipment".
The life span of the machine can be reduced and the risk of accidents can increase if machine
maintenance is not carried out correctly and if service and/or repairs are not carried out
professionally. If you need further information please contact your nearest servicing dealer.
•
Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs.
Maintenance schedule
In the maintenance schedule you can see which parts of your machine that require maintenance, and with which
intervals it should take place. The intervals are calculated based on daily use of the machine, and may differ depending
on the rate of usage.
Daily Maintenance
Cleaning
External cleaning
Cooling air intake
Functional inspection
General inspection
Throttle lockout*
Stop switch*
Hand guard, rear right hand guard,
clutch cover and spray guard*
Bar and diamond chain**
Water delivery system
Check for fuel leaks
*See instructions in the section "Machine's safety equipment".
** See instructions in the section "Diamond chains", "Assembling and adjustments" and "Maintenance".
MAINTENANCE
Weekly maintenance
Cleaning
Functional inspection
Vibration damping system*
Muffler*
Drive belt
Carburetor
Starter housing
Monthly maintenance
Cleaning
Spark plug
Fuel tank
Functional inspection
Fuel system
Air filter
Drive gear, clutch
English – 23
Publicité
