Télécharger Imprimer la page

Bimar HO007 Mode D'emploi page 11

Radiateurs bain d'huile

Publicité

Les langues disponibles
  • FR

Les langues disponibles

• If the appliance should fall over or show signs of faulty operation,
disconnect the electrical cable immediately. Check that no part is
damaged and switch on after the appliance has been thoroughly
checked: in case of doubt, contact qualified professional personnel.
• Do not pull on the power cord or the appliance to unplug the appliance
from the wall socket. Never move the appliance by pulling the cord.
• Unplug the appliance when not in use.
Don't leave the appliance unattended while it is connected to the
supply.
• Do not move the appliance when it is in function.
• In order to avoid any risk of electrical shock, never immerse the plug,
the mains cable and the appliance in water or in any other liquid.
• If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or a similarly qualified person in order to avoid hazard.
• Never use the radiator to dry damp garments.
• Never use this heater in the immediate surroundings of a bath, a shower
or a swimming pool, to prevent any danger of electrical shock, or in any
positions where it can be pushed and/or damaged.
• WARNING: this heater is not equipped with a device to control
the room temperature. Do not use this heater in small rooms
when they are occupied by person not capable of leaving the
room on their own, unless constant supervision is provided.
• Never use the appliance in environments smaller than 4 m
inflammable liquids or products are stored.
• The appliance must not be located immediately below a socket.
• The power socket must be easy to reach so the plug can be removed
quickly in case of emergency.
• To avoid risk of fire do not use the appliance with a timer, a programmer
or with a system that can switch the appliance automatically on , since a
fire risk exists if the heater is covered or positioned incorrectly.
11
or where
2

Publicité

loading

Ce manuel est également adapté pour:

Nsc-60-7x