Télécharger Imprimer la page

Phase Linear UMP9020 Manuel De L'utilisateur page 2

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
Para obtener instrucciones en Espa
PREPARATION
Getting Started
It's a good idea to read all of the instructions
before beginning the installation.
Contents
Installation Instructions.............................. 3
Wiring ........................................................ 4
Operating Instructions ............................... 5
CD Player Operation ................................. 9
MP3/WMA Player Operation ................... 12
Tape Player Operation............................. 14
CD Changer Controls .............................. 15
Wireless Remote Control Operation........ 16
Care and Maintenance ............................ 17
Specifications .......................................... 18
90 Day Limited Warranty......................... 19
Installation Requirements
This unit is designed for installation in cars,
trucks, and vans with an existing radio opening.
In many cases, a special installation kit will be
required to mount the radio to the dashboard.
These kits are available at electronics supply
stores and car stereo specialty shops. Always
check the kit application before purchasing to
make sure the kit works with your vehicle. If you
need a kit but cannot locate one, call our
ñ
ol, diríjase a la página 22.
Pour des instructions en Francais, référez-vous à la page 42.
customer support line at 1-800-323-4815.
(U.S.A. and Canada only.)
Tools and Supplies
The following tools and supplies are needed to
install the radio.
Torx type, flathead and Philips
screwdrivers
Wire cutters and strippers
Tools to remove existing radio
(screwdriver, socket wrench set or other
tools)
Electrical tape
Crimping tool
Volt meter/test light
Crimp connections
18 gauge wire for power connections
16-18 gauge speaker wire
Speaker Requirements
Only connect speakers rated with a load
impedance of 4 ohms. Speakers with a load
impedance of less than 4 ohms could damage
the unit.
2
UMP9020
Disconnect Battery
Before you begin, disconnect the battery
negative terminal.
Toll-Free Installation Assistance
If you require assistance, contact Technical
Support at 1-800-323-4815 from 8:30 a.m. to
7:00 p.m. EST Monday through Friday and from
9:00 a.m. to 5:00 p.m. EST on Saturday.
(U.S.A. and Canada only.)

Publicité

loading