Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
TAPE PLAYER OPERATION
Cassette Door/Insert
23
To access the cassette door, located behind the
front panel, press the TAPE OPEN CLOSE
button (23). The front panel will open and fold
down to the horizontal position, allowing room
to insert a cassette into the player. To insert a
cassette, hold the cassette with the exposed
tape edge of the side to be played to the right
and insert it fully into the cassette door. As the
cassette is engaged and begins playing,
"TAPE" appears on the display panel
accompanied by the tape symbol (
).
Direction of play is indicated by an animated
curser which moves in a square pattern.
Clockwise rotation indicates left-to-right tape
motion, while counter-clockwise rotation
indicates right-to-left tape motion. When the
cassette reaches the end of one side, the unit
automatically changes direction of play as
shown by the arrow indications on the display
panel.
Fast-Forward/Rewind
25
Buttons
The fast forward and rewind buttons cause the
tape to move rapidly in the direction indicated
by the arrows. If the fast-forward (
) button is
pushed when the tape is moving from left to
right, the tape quickly advances forward. If the
rewind (
) button is pressed while the tape is
moving from right to left, the tape rewinds. To
stop fast tape movement, lightly push the
opposite button. If the tape is allowed to fast-
forward or rewind all the way to the end, play
automatically starts from the beginning.
Tape Program Selector
25
To manually reverse tape direction and play the
other side of the cassette, lightly push both the
fast-forward and rewind buttons (25) at the
same time. The change of direction is indicated
by the animated cursor on the display panel.
26
14
UMP9020
Tape Eject Button
26
To stop tape playback and eject the tape, press
the tape eject
button (26), located behind the
front panel. If the button is not visible, press the
TAPE OPEN CLOSE button (23) to release the
front panel and lower it to the horizontal
position. Radio operation resumes when the
cassette is ejected.
NOTE: To avoid damage to the cassette or
radio, remove the cassette when not in use.
24
25
Publicité
