Phase Linear UMP9020 Manuel De L'utilisateur page 11

All manuals and user guides at all-guides.com
UMP9020
CD PLAYER OPERATION
Repeat Play Selector (RPT)
15
During disc play, press the RPT button (15) to
repeat the playback of a desired track (S-RPT
appears on the display panel). Play of the
selected track will continue to repeat until the
Track Repeat function is cancelled by pressing
the button again or by activating the Scan or
Random play function, causing the "S-RPT"
indication to disappear. You can also cancel
Repeat Play mode by activating the Track Scan
or Random Play functions.
Random Play Mode (SHF)
16
Selector
During disc play, press the SHF button (16) to
play the tracks on the disc in a random or
shuffled order ("S-SHF" appears on the display
panel). In Random Play mode, pressing the up
or down MANU/SKIP buttons (6) will select
tracks in a random order instead of the normal
progression. To cancel, press the SHF button
again. The "S-SHF" indication disappears. You
can also cancel Random Play mode by
activating the Track Scan or Random Play
functions.
Disc Eject Button
21
Press the CD OPEN CLOSE EJ button (21) to
allow the front panel to fold down, exposing the
disc slot (22). Press and hold the CD OPEN
CLOSE EJ button to eject the disc and revert to
radio operation. Discs may be ejected with the
vehicle ignition switch on or off. If an ejected
disc is not removed from the disc slot within 15
seconds of being ejected, the disc will be re-
inserted automatically, and the disc symbol will
reappear on the display to show that a disc is
still installed in the unit.
NOTE: To prevent a disc from accidentally
being damaged, always remove the disc
from the unit when disc play is finished.
11