Bosch PAM0720 Mode D'emploi page 32

Navigation
Instructions for Use
Preparing the appliance
Installing the air expulsion tube
Fit the air expulsion tube onto the fixture with
the "push" tab and thread it anti-clockwise,
Fig. 6.
Fig. 6
If easier, the housing can also be removed
from the appliance by pressing the "Push" tab
and sliding it out, Fig. 7.
Fig. 7
Housing for the air
expulsion assembly
Once out, thread the expulsion tube as shown
on Fig. 8, making sure that it is properly
secured.
Fig. 8
Then fit the assembly onto the appliance by
slotting it into position Fig. 9.
Fig. 9
Securing the diffusion duct onto the air
expulsion tube
Fit the diffusion duct onto the free end of the
tube pushing both parts gently until the duct
clicks into place. Make sure that the clips are
closed. Otherwise, the duct may fall off. ..........
Fig 10.
32
¡clac!
Fig. 10