Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
7 - STOP ADJUSTMENT
7A - INTRODUCTION
The mechanical-stop enables to stop the gate at a required position, avoiding the door to hit the stop devices.
7B - INSTRUCTION FOR THE REGOLATION
INSTRUCTION (see pic.7):
- Set the gear-motor on manual override (pic.4).
- Twist off the screw of the mechanical-stop (B or D).
- Move the door to the desired opening/closing position.
- Place the mechanical-stop next to the sliding pin (C).
- Turn the screw tightly.
- Set the gear-motor on automatic functioning (pic.5).
7
D
C
B
The gear-motors are normally provided with mechanical stop in open position. In case of lack of external
!
mechanical stop in closing position, it is possible to buy the optional mechanical stop.
Publicité
