Klarstein BERETTA PREMIUM Mode D'emploi page 29

CONTROL PANEL AND BUTTON FUNCTIONS
Press this button to switch the motor on/off.
Lowest speed setting.
Medium speed setting.
High speed setting.
Light on/off.
Booster function
To activate the booster function, press and hold the button
flashes. The speed automatically changes to setting 3 after 5 minutes.
Switch-off delay
Press and hold the two buttons
the buttons for longer to cancel the delay.
CLEANING AND MAINTENANCE
Switch off the extractor hood and pull the plug out of the socket before cleaning
and maintenance. The outer surfaces are susceptible to scratches and stains.
Therefore, do not use scouring agents for cleaning and wipe away residues of
alkaline or acidic substances (lemon juice, vinegar) immediately after cleaning.
Stainless steel surfaces
The stainless steel must be cleaned regularly to ensure a long service life. Use
stainless steel cleaner for this purpose. Always wipe along the grain of the
stainless steel to prevent criss-crossing scratch marks.
and to set a 5 minute delay. Press and hold
. The symbol
EN
29