Klarstein BERETTA PREMIUM Mode D'emploi page 30

EN
30
Control panel interface
The control panel can be cleaned with a damp cloth and mild dishwashing
detergent. Before cleaning, make sure the cloth is clean and well wrung out. Use a
dry, soft cloth to remove excess moisture after cleaning.
Monthly cleaning of the grease filters
Clean the filter every month to avoid a fire hazard. The filter collects grease, smoke
and dust and thus influences the efficiency of the cooker hood. If the filter is not
cleaned, grease residues will collect there. Clean the filter with water and a little
washing-up liquid and let it air dry afterwards.
TROUBLESHOOTING
Problem
The light is on but the
fan does not work
Neither the light nor the
fan work
The unit vibrates
strongly
The suction performance
is not good
Possible cause
The fan blades are
blocked.
The motor is damaged.
The light bulb has burnt
out.
The mains cable is loose.
The fan blade is
damaged.
The fan motor is not
firmly secured.
The appliance is not
correctly mounted on
the holder.
The distance between
the appliance and the
cooking surface is too
great.
Solution
Switch off the appliance
and have it repaired by
qualified personnel only.
Replace the bulb with a
bulb of the same type.
Correctly plug the mains
cable into the socket.
Switch off the appliance
and have it repaired by
qualified personnel only.
Take the unit off the
holder and attach it
properly.
Adjust the distance to
65 – 75 cm.