DELTACALOR DIGITAL THERMOSTAT Manuel D'instructions page 14

• Press PROG to confirm the entered configura-
tion for day 1, and repeat the same procedure for
the remaining 6 days of the week.
SPECIAL FUNCTIONS
KEY LOCK
It is possible to lock the buttons of the device to avoid
inadvertent modifications of the settings.
• Press together the
lock all the buttons except the
The Key lock icon is activated on the display.
• To unlock the buttons press again together the
PROG buttons for 3 seconds. The
disappears on the display.
OPEN WINDOW DETECTION FUNCTION
The Open Window Detection function enables detecting of an open window by sensing
a sudden decrease of the temperature in the room. In such a case, the device deactivates
the heating element for a maximum of 30 minutes or until an increase of the room temper-
ature reveals that the window has been closed.
To activate this function:
• Enter into Stand-by mode.
• Press the button for 3 seconds.
• Press the button to activate / deactivate the function
• Press the button to commit and return into Stand-by mode.
When this function is enabled, the
When the device detects that the window is potentially opened, the
icon starts blinking.
When the function is disabled the Open Window icon is not shown on the display.
PROG buttons for 3 seconds to
ON/STAND-BY button.
Key lock icon
Open Window icon on the display is lit.
+
+
14
EN
Open Window