Master & Dynamic MW07 Mode D'emploi page 6

TEMPERATURE RANGE
Operate and store this product within the temperature range of -4°F to 113°F
(-20°C to 45°C) only. Charge the battery where the temperature is between
41°F and 104°F (5°C and 40°C) only.
NFMI
Master & Dynamic uses NFMI technology for connecting one earphone to the
other. While this is industry leading technology, and not specific to Master &
Dynamic products, there may be some instances where interference or
micro drop outs may occur.
Intermittent interference or micro drop outs can be caused by numerous
factors, but common causes include, but are not limited to the following: door
security systems, bus/metro token machines, large metal objects and close
proximity to other NFMI-enabled devices.
All manuals and user guides at all-guides.com
MAINTENANCE/CARE
Over time the proximity sensor that helps regulate pause/play functions may
become dirty and affect performance. If this happens, take a damp Q-tip or
damp cloth and lightly rub the sensor.
Clean the earphone acetate using a microfiber cloth. Do not use alcohol or
other cleaning substances on the product.
Clean the ear tips and earphones with a soft, slightly damp cloth. Do not soak,
submerge or allow moisture to enter near the drivers or cable jacks.
Do not drop, sit on, or allow the product to be exposed to water, moisture, or
temperature extremes. Your earphones are IPX4 water resistance rated. Your
charging case is IPX3 water resistance rated.
It is recommended that you return your earphones to their charging case
when not in use. To avoid damage to the charging case, do not store other
items in the canvas pouch along with your case.
5