Power Fist 8011796 Mode D'emploi page 12

V 2.7
Problem(s)
Tool will not run. Air flows freely
from exhaust.
Tool will not shut off.
Loss of power or erratic
performance.
12
All manuals and user guides at all-guides.com
3/8 in. Right Angle Air Drill
Possible cause(s)
O-rings throttle valve dislodged
from seat inlet valve.
Damage or excessive wearing of
internal parts.
Material buildup impeding
motor vanes.
O-rings throttle valve dislodged
from seat inlet valve.
Excessive drain on the air line.
Moisture or restriction in the air
hose. Incorrect size or type of
hose connectors.
Air compressor has
insufficient flow.
For technical questions call: 1-800-665-8685
8011796
Suggested solution(s)
Have a qualified technician
replace the O-ring.
Bring to Princess Auto Ltd. or a
qualified technician.
Clean internal mechanism.
Bring to Princess Auto Ltd. or a
qualified technician.
Check the air supply. Ensure tool
is connected to a 3/8 in. I.D. or
larger air hose with no kinks or
restrictions and that the fittings
are connected properly.
Ensure tool is connected to a
compressor with a rated flow
that matches the tool.