Publicité
Les langues disponibles
Les langues disponibles
loCatinG Your Grill
When determining a suitable location for your Summit
attention to concerns such as exposure to wind, proximity to traffic paths, and keeping
any gas supply lines as short as possible. Never locate the Summit
garage, breezeway, shed, under an unprotected overhang, or other enclosed area.
Locate the grill and structure so there is enough room to safely evacuate the area in
case of a fire.
ClearanCe from surfaCes or struCtures
m warninG: Clearance from any surface or structure is
24" (610 mm) from the back and sides of the grill. refer
to "typical Gas supply installation" before starting
installation.
m warninG: the structure, "island", countertops, and
adjacent work areas for the built-in grill installation must be
built from noncombustible materials only.
NOTE: If you have questions on what materials are considered noncombustible, contact
your local building materials supplier or fire department.
built-in struCture Cutout dimensions
All dimensions are to finished surfaces.
m warninG: all countertop finished surfaces must be
constructed of a noncombustible material.
4
bUILT-IN cUToUT DImENSIoNS
®
gas grill installation, give
®
gas grill in a
◆
◆
cLEaraNcES
1
2
1
24" (610 mm) any surface
2
27" (686 mm) minimum for lid clearance
bUILT-IN cUToUT GENEraL DImENSIoNS
3
2
1
460
1
34" (864 mm)
2
36" (914 mm)
3
24 5/16" (618 mm)
24 5/16" (618 mm)
1
1
660
ToLEraNcES
42" (1067 mm)
±1/4" (6 mm)
36" (914 mm)
max
±1/4" (6 mm)
Publicité
