Black & Decker NW36XXY Mode D'emploi page 7

Battery (fig. H)
NiCd/NiMH
If you want to dispose of the product
yourself, the battery must be removed as
described below and disposed of in
accordance with local regulations.
Warning! Disconnect the appliance from
the power supply before removing the
battery.
Discharge the battery by operating

the appliance until the motor stops.
Take the accessories from the

appliance.
Remove the screws (7).

Open the appliance.

Remove the battery and the attached

motor and switch module (8).
Use a screwdriver to detach the battery

from the motor and switch module.
Place the battery in suitable

packaging to ensure that the
terminals cannot be short-circuited.
Take the battery to your service

agent or a local recycling station.
Warning! Once removed, the battery
cannot be refitted.
Technical data
Voltage V 3.6
Battery type
Weight kg 0.9
Charger
Input voltage
Approx. charging time
NW36XXY NW48XXY
4.8
NiCd/NiMH NiCd/NiMH
0.9
V 230
AC
h 16
ENGLISH
EC declaration of conformity
NW36XXY/NW48XXY
Black & Decker declares that these
products conform to:
89/336/EEC, 73/23/EEC, EN 55014,
EN60335, EN 61000
Level of sound pressure, measured
according to EN 60704-1: < 70 dB(A)
Director of Consumer Engineering
Spennymoor, County Durham DL16 6JG,
European Community patent application
nos. 000 540 745 & 000 540 752
European Community design application
nos. 000 541 230 & 000 540 752
DUSTBUSTER is a registered trade
mark of the Black & Decker Corporation.
Guarantee
Black & Decker is confident of the quality
of its products and offers an outstanding
guarantee. This guarantee statement is
in addition to and in no way prejudices
your statutory rights. The guarantee is
valid within the territories of the Member
States of the European Union and the
European Free Trade Area.
If a Black & Decker product becomes
defective due to faulty materials,
workmanship or lack of conformity, within
24 months from the date of purchase,
Black & Decker guarantees to replace
defective parts, repair products subjected
to fair wear and tear or replace such
products to ensure minimum
inconvenience to the customer unless:
The product has been used for trade,

professional or hire purposes;
The product has been subjected to

misuse or neglect;
The product has sustained damage

through foreign objects, substances
or accidents;
Kevin Hewitt
United Kingdom
1-11-2006
7