Télécharger Imprimer la page

i.safe MOBILE EXECUTIVE 2.0 Manuel De Demarrage Rapide page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
All manuals and user guides at all-guides.com
English
4 Faults and Damages
If there is any reason to suspect that the safety of the phone has been com-
promised, it must be withdrawn from use and removed from any ex-hazardous
areas immediately.
Measures must be taken to prevent any accidental restarting of the phone.
The safety of the phone may be compromised, if, for example:
• malfunctions occur.
• the housing of the phone or the battery shows damage.
• the phone has been subjected to excessive loads.
• the phone has been stored improperly.
• markings or labels on the phone are illegible.
It is recommended that a phone which shows or which is suspected of faults
and damages is returned i.safe MOBILE GmbH for inspection.
5 Ex-relevant Safety Regulations
Use of this phone assumes that the operator observes the conventional saf-
ety regulations and has read and understood manual, safety instructions and
certificate.
The following safety regulations must also be complied with:
• Inside ex-hazardous areas the phone must be closed. The battery cover has
to be fixed by the two screws and the covers of the interfaces have to be
closed.
• To ensure the IP-protection, it has to be ensured that all gaskets are present
and functional. The screws at the top and the bottom of the back of the pho-
ne need to be covered by the black gaskets, so that the screw heads are not
visible. There must be no large gap between the two halves of the housing.
• The battery may only be exchanged or charged outside ex-hazardous areas.
• The phone may only be charged outside ex-hazardous areas using the appro-
priate charger or other equipment approved by i.safe MOBILE GmbH.
• Use only the appropriate battery type BPE02A or BPE02B.
• It is not allowed to carry spare batteries into ex-hazardous areas.
• The phone may be charged only at temperatures in between 0°C ... 45°C.
• The phone must not be exposed to abrasive acids or bases.
• The phone must not be taken into zones 0, 1, 20, 21 or 22.
• Only accessories approved by i.safe MOBILE GmbH may be used.
4
i.safe MOBILE

Publicité

loading