Panasonic CZ-RELC2 Manuel D'instructions page 5

C: Temperature setting
buttons
D: FAN SPEED selector
button
(AUTO)
(HI.)
(MED.)
(LO.)
E: FLAP button
F: Temperature sensor
(Internal)
G: TEST button
CAUTION
NOTE
All manuals and user guides at all-guides.com
: Press this button to increase the temperature setting.
: Press this button to decrease the temperature setting.
: The air conditioner automatically decides the fan speed.
: High fan speed
: Medium fan speed
: Low fan speed
1. Use this button to set the airfl ow direction to a specifi c angle.
• In the cool mode and dry mode, if the fl aps are set in a
downward position, condensation may form and drip around the
vent.
• Do not move the fl ap with your hands.
Although the temperature sensor in the indoor unit normally detects
the temperature, this internal sensor can detect the temperature
around the remote controller. For more information, contact the dealer
where you made the purchase. (Do not make any settings if group
control is being used.)
This button is used only when servicing the air conditioner.
Do not use the TEST button for normal operation.
When any button is pressed, the backlight of the LCD display lights up
for 30 seconds.
* Group control means that maximum up to 8 indoor units can be
concurrently controlled with a remote controller.
EN-3
EN