Publicité
Les langues disponibles
Les langues disponibles
Alarm setting:
Hold the "ALARM" button for 3 seconds to enter alarm time setting.
Press "▲" or "▼" button to adjust the alarm time. Press the "ALARM"
button to confirm the setting.
The setting sequence is shown as follows: hour -> minute -> exit
Press the "ALARM" button to switch alarm on or off. The alarm icon
"
" is shown on the display once the alarm is set on and is no longer
displayed once the alarm is set off again.
Press the "ZEIT" button to view the alarm time and "AL" will be
displayed on the display.
Note:
The alarm setting will automatically exit in 10 seconds without any
adjustment from buttons.
Alarm and snooze function:
When alarm sounds, alarm icon "
button to activate the snooze alarm ("
other button to stop the alarm and it will sound at the same time of the
next day.
During active snooze function, the snooze icon "
the alarm icon "
sounds again. This snooze function can be enabled for countless
times.
Press any button except the "Zzz" button during the snooze function to
stop the snooze alarm.
Note:
The alarm will sound for 2 minutes and increases in intensity over time
before it automatically stops, if not interrupted by pressing any buttons.
Moon phase
Moon phase is based on the calendar date and displayed as one of the
following 8 states:
Full moon
" and the alarm will stop for 5 minutes, then it
Waning gibbous
" is flashing. Press the "Zzz"
" flash on the LCD) or any
Last quarter
EN6
" will flesh next to
Waning crescent
Publicité
