Télécharger Imprimer la page

Klipsch Heritage Serie Mode D'emploi page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
• Caution: With all connection types take care that there is
no contact between the positive and negative terminals at
the speaker and amplifier. Damage to your equipment
may result! (See Figure 4.)
Klipschorn: Input connections are found on the input panel on
the side of the low frequency cabinet. Two of the four pairs of
binding posts are used to connect the speaker cables coming
from your amplifier and will accommodate bare wire, spade
lugs or banana plugs. They are labeled "HF IN" and "LF IN."
Both red (+) and both black (-) posts are connected with wire
jumpers. Leave these jumpers in place for conventional single
wire connection and use either pair of posts. Remove these
jumpers for optional bi-wire connection. (See Figure 5.)
Do not connect your amplifier directly to the midrange or
tweeter driver leads or to the posts labeled "Mid Out" or "HF
Out" as you may damage the speaker.
La Scala II: The two pairs of binding posts located on the rear
of the loudspeaker are used to connect the speaker cables
coming from your amplifier and will accommodate bare wire,
spade lugs of banana plugs. These binding posts are labeled
"HF IN" and "LF IN" and "LF-." Both red (+) and black (-)
posts connected with wire jumpers. Leave these jumpers in
place for conventional single wire connection and use either
pair of posts. Remove these jumpers for bi-wire connection.
(See Figure 5.)
Cornwall III and Heresy III: The two pairs of binding posts
located on the rear of the loudspeaker are used to connect the
speaker cables coming from your amplifier and will accommo-
date bare wire, spade lugs of banana plugs. These binding
posts are labeled "HF+", "HF-", "LF+" and "LF-." And have
both red (+) and black (-) posts connected with metal straps.
Leave these straps in place for conventional single wire
connection and use either pair of posts. Remove these straps
for bi-wire connection (See Figure 4).
WARRANTY—U.S. AND CANADA ONLY
The Warranty below is valid only for sales to consumers in the
United States or Canada.
KLIPSCH, L.L.C. ("KLIPSCH") warrants this product to be free
from defects in materials and workmanship (subject to the
terms set forth below) for a period of five (5) years from the
date of purchase. During the Warranty period, KLIPSCH will
repair or replace (at KLIPSCH's option) this product or any
defective parts (excluding electronics and amplifiers). For
products that have electronics or amplifiers, the Warranty on
those parts is for a period of two (2) years from the date of
purchase.
To obtain Warranty service, please contact the KLIPSCH
authorized dealer from which you purchased this product. If
your dealer is not equipped to perform the repair of your
KLIPSCH product, it can be returned, freight paid, to KLIPSCH
for repair. Please call KLIPSCH at 1-800-KLIPSCH for
instructions. You will need to ship this product in either its
original packaging or packaging affording an equal degree
of protection.
All manuals and user guides at all-guides.com
Proof of purchase in the form of a bill of sale or receipted
invoice, which is evidence that this product is within the
Warranty period, must be presented or included to obtain
Warranty service.
This Warranty is invalid if (a) the factory-applied serial number
has been altered or removed from this product or (b) this
product was not purchased from a KLIPSCH authorized dealer.
You may call 1-800-KLIPSCH to confirm that you have an
unaltered serial number and/or you purchased from a KLIPSCH
authorized dealer.
This Warranty is only valid for the original purchaser and will
automatically terminate prior to expiration if this product is
sold or otherwise transferred to another party.
This Warranty does not cover cosmetic damage or damage
due to misuse, abuse, negligence, acts of God, accident, com-
mercial use or modification of, or to any part of, the product.
This Warranty does not cover damage due to improper opera-
tion, maintenance or installation, or attempted repair by any-
one other than KLIPSCH or a KLIPSCH dealer which is author-
ized to do KLIPSCH warranty work. Any unauthorized repairs
will void this Warranty. This Warranty does not cover product
sold AS IS or WITH ALL FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS
WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CON-
SUMER. KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT
TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS
EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND
IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT
LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FIT-
NESS FOR A PRACTICAL PURPOSE.
Some states do not allow the exclusion or limitation of inciden-
tal or consequential damages or implied warranties so the
above exclusions may not apply to you. This Warranty gives
you specific legal rights, and you may have other rights, which
vary from state to state.
WARRANTY OUTSIDE THE UNITED STATES AND CANADA
The Warranty on this product if it is sold to a consumer outside of
the United States or Canada shall comply with applicable law and
shall be the sole responsibility of the distributor that
this product. To obtain any applicable warranty service, please
contact the dealer from which you purchased this product, or the
distributor that supplied this product.
supplied

Publicité

loading

Ce manuel est également adapté pour:

Heritage cornwall iiiHeritage heresy iiiHeritage la scala ii