La Crosse Technology 308-1425CA Manual D'instructions page 10

View Dew Point Temperature:
From a normal display, press the HEAT/DEW button twice and Dew Point will show place of the
remote temperature.
Note: Dew Point is lower than the actual temperature.
The indoor and remote temperature/humidity trend indicators will update every 30 minutes or less.
These trends represent temperature changes over the past three hours.
Example: At 1:00pm, the arrow indicates the change in temperature since 10:00am. At 1:30pm, the
arrow will indicate the temperature change since 10:30am.
Temperature has risen in the past 3 hours.
•
Humidity has risen in the past 3 hours.
•
Temperature has not changed in the past 3 hours.
•
Humidity has not changed in the past 3 hours.
•
Temperature has fallen in the past 3 hours.
•
Humidity has fallen in the past 3 hours.
•
Hold the HEAT/DEW button to search for the remote sensor.
•
The strength signal icon will animate until the sensor signal is received or for 3 minutes if no
•
signal available.
The Weather station provides the daily minimum and maximum temperatures each day starting at
midnight (12:00 AM). The Weather station automatically resets the min/max temperatures at midnight
(12:00 AM).
View MIN data: Press and release the ▼ button to view the minimum Indoor and
Remote Temperatures.
Reset MIN data: Hold the ▼ button for two seconds and the Indoor and Remote
Minimum Temperatures will be reset.
View MAX data: Press and release the ▲button to view the maximum Indoor and Remote
Temperatures.
Reset MAX data: Hold the ▲ button for two seconds and the Indoor and all Remote Maximum
Temperatures will be reset.
Note: The temperature area shows dashes briefly then return to current temperatures.
Model: 308-1425CA
Temperature/Humidity Trend indicators
Search for Remote Sensor
MIN/MAX (View, Reset)
https://www.lacrossetechnology.com/308-1425ca Page | 10