Publicité
Les langues disponibles
Les langues disponibles
4.2 Initial use
• Spread out the heated underblanket flat onto your mattress starting at the foot end.
The electric blanket can be used on both sides.
• To operate the heated underblanket connect the control to the heated underblanket
by plugging in the connector.
• Then plug in the supply plug into the mains outlet.
• Then put on your bedsheet in the usual manner so that the heated underblanket is
between your mattress and the bedsheet.
CAUTION
Make sure that the underblanket is spread out entirely flat and that it will not
rumple up or crease when in use. Check its position when making the bed.
4.3 Switching on
Slide the ON/OFF switch (6) on the side of the control (2) to position 1 ( I ), to switch the electric blanket on.
When it is switched on, the LED indicator for temperature setting 1 lights up.
4.4 Setting the temperature
Press the button (4) to increase the temperature.
Press the button (5) to decrease the temperature.
Setting 0:
OFF
Setting 1:
minimum heat
Setting 2:
medium heat
Setting 3:
maximum heat
Stand
: maximum heat - just the feet area
NOTE
• The quickest way to heat up the electric underblanket is to select the highest temperature setting of the control, first.
• We strongly recommend switching on the electric underblanket approx. 30 minutes before going to bed and
covering it with the quilt to prevent the warmth from escaping.
CAUTION
If the heated underblanket is used continuously (for several hours)
it is recommended to use the lowest setting (1) of the control to
avoid the body overheating and thereby any potential burns to the
skin or heat stroke.
4.5 Automatic switch off
This electric underblanket switches off automatically after 12 hours. Once the electric underblanket has switched off, it is no longer
heated and the LED indicator for temperature setting 1 flashes.
To switch on the electric underblanket again, first set the ON/OFF switch on the side of the control to the OFF ( 0 ) position for 5
seconds. Then set the ON/OFF switch back to ON ( I ) and select the desired temperature setting.
4.6 Switching off
Slide the on-/ off button (9) at the side of the control to position 0, to switch the electric blanket off.
NOTE
If the electric underblanket is not used for several days, set the ON/OFF switch to the OFF (0) position and remove the mains
plug from the socket. Then remove the control from the electric underblanket by disconnecting it at the connector.
18
•
English
Publicité
