Publicité
8
EN
TECHNICAL SAFETY
• Installation of this appliance must
be performed only by a licensed
specialist.
• Check the appliance for visible
signs of damage before using it.
If the appliance has been dam-
aged in transport, do not connect
it. Never use a damaged appli-
ance! It could be dangerous!
• Repairs should be performed by
a licensed technician only. Im-
proper repair may result in con-
siderable danger to you and oth-
ers. If your appliance needs
repair, contact a Service Centre
or your dealer.
• If the supply cord is damaged, it
must be replaced by the manu-
facturer, its service agent or simi-
larly qualified persons in order to
avoid a hazard.
• Electrical leads and cables must
not be touching the appliance.
• The appliance should be con-
nected to the mains power sup-
ply by means of an approved cir-
cuit breaker or fuse. Never use
multiple plug adapters or exten-
sion leads to connect appliance
to the mains electricity supply.
•
The power supply of the appli-
ance should be turned off before
repair or clean.
•
This appliance must not be used
in a non-stationary location (for
example on a ship).
Attention!
To avoid the
possibility of electric shock,
the appliance should be
powered down before re-
placing the
lamp.
Publicité
