Faber ONYX-C BK GLASS/X A90 Mode D'emploi page 7

5. REMOTE CONTROL
The remote control is powered by a CR2032
type 3 V battery (not included).
• Do not place the remote control near
heat sources.
• Do not discard the batteries with normal
containers.
Turns the motor on/off at speed one.
-
Turns the lights On/Off.
Enables/Disables the motor at INTENSIVE 1.
Press and hold for approximately 2 seconds
to turn the motor on at speed INTENSIVE 2.
Press and hold for approximately 2 seconds
to activate/deactivate 24H mode.
Increases the working speed of the motor.
Decreases the working speed of the motor.
6. LIGHTING
• For replacement contact technical support
("To purchase contact technical support").
7